FIDECO 4 Bay USB 4 40Gbps M.2 NVMe SSD Docking Duplicator

FIDECO 4 Bay USB 4 40Gbps M.2 NVMe SSD Docking station, support offline clone function and tool free Installation.

Off-line Cloning, Fast Heat Dissipation, Unique Shape

Material: Aluminum alloy

Transmission Speed: 20Gbps (Theoretical speed)

Compatibility: M Key & (M+B) Key

USB Interface: USB4 40Gbps

Compatible Systems: Windows/Mac/Linux

High transfer speed up to 20Gbps for 2*2 2oGbps

Offline clone up to 8TB SSD whole copy function without PC

Excellent Heat Dissipation

Big foldable cooling fan design making dissipates heat and exhaust efficiently, aluminum construction protects the drive from overheating and reduces vibration.

Designed for Multi NVMe M.2 SSDs

FIDECO 4 bay NVMe duplicator support four M.2 nvme ssds(2230,2242,2260,2280). NOT support SATA SSDs.

Compatible with multiple operating systems, such as Windows, macOS and Linux.

You will never regret to have one.

1. To access NVME with a PC: Once you attach power and Type-C USB, you’re ready to go. Carefully insert the NVME SSD into the slot(s) of your choice and push the power button on the back of the dock. Wait a few seconds, and the dock should be enumerated in Windows. Depending on the state of the SSD, you’ll either need to go to Drive Manager to initialize and format the SSD’s, or they could just pop-up in Explorer, ready to use.

2. For Standalone Duplication: Plug the target SSD into Slot target , and plug the source SSD into slot A (the front of the docking). Target SSD capacity must be Larger than Source SSD capacity. Press and hold the power button for 3-5 seconds to begin the clone process. LED’s on the front top of the dock indicate clone progress – 25%, 50%, 75% and 100%.

Warm Tips

• Check if your SSD interface is clean before inserting into slot.
• Insert and remove your SSD carefully only when the power is off.
• Do not tilt or bend your SSD during its installation or removal. Never force it into the slot.
• When using or duplicating a drive, especially a large one, it’s best to use with a cooling fan for better heat dissipation.
• A brand new SSD needs to be formatted and initialized on the computer before it can be used.

Offline Clone steps:

Step 1

1. Before cloning, disconnect the USB cable from the device. 2. Plug the source M2.NVME SSD in Slot S2(S3, S4)  and the target M2.NVME SSD in Slot S1.

Note: The capacity of Target SSD needs Larger than the source SSD. Target>Source

Step 2

1. Connect the power adapter to the enclosure 2. Press the power button.

3. Hold the clone button for 3-5 seconds until LED indicator begins to flash.

Step 3

The LED indicators show the cloning process from 25%,50%,75% and 100%.

When all four LEDs stop flashing, the cloning is finished. This process may take a long time which mainly depends on the capacity of SSD.

FAQ

Q1. Why does the cloning operate quit immediately?

This happens mainly for two different reasons:

(1) the target drive is new and has not been initialized, or (2) the target drive is smaller than the cloned drive.

When cloning is started, the device checks the source and target drives. If the target is not initialized or is smaller than the source, the cloning operation is aborted.

Solutions:

If the SSD is new, it needs to be formatted and initialized before it can be used.

1) Connect the device to a computer.

2) Right-click This PC -> Management -> Disk Management.

3) Right-click the target drive (the one that shows as uninitialized), and select Initialize from the drop-down menu.

4) Disconnect the device from the computer, and try cloning again.

Q2. Does M248 come with power adapter?

Yes, it is with 5V3A power adapter.

Q3. How long does each clone take?

It takes about 16mis from 1:3 clone 1TB as tested.