FIDECO SATA 2.5″ 3.5″ HDD SSD USB 3.0 Hard drive Dock Station with RGB

FIDECO SATA 2.5″ 3.5″ HDD SSD USB 3.0 Hard drive Dock Station with RGB

FIDECO hard drive docking station can help you get easy access to your old SATA HDD by connecting it to your computer. It can be also used as an external storage device to add more storage space for your laptops or desktops.

Supported HDD/SSD:

FIDECO hard drive docking station can support all 2.5/3.5 inch SATA I/II/III HDD/SSD.

The maximum supported HDD capacity can reach 22TB. Please note that it cannot support any IDE hard drive.

Maximum 5Gbps High Speed:

Thanks to the USB 3.0 port, the maximum data transfer speed can reach 5Gbps. Transfer 1G files in just seconds!

Our hard disk docking station can be also backward compatible with USB 2.0 to meet your potential needs.

Compatible System:

FIDECO docking station is widely compatible with Windows, Mac OS and Linux. Just plug and play with no driver needed!

Easy Operation:

Absolutely no complex operation steps! Just insert your SATA HDD/SSD, connect the USB cable and power adapter respectively, and then turn on the power switch.

Suitable for various device with USB 3.0 A-A/C cable

Supported HDD/SSD

FIDECO docking station is compatible with 2.5 & 3.5 inch SATA HDD/SSD with tool free installation. Please note that it cannot support IDE hard drive.

Smart Chip

Our docking station is built in with an intelligent chip to maintain safe & stable data transfer with lower power consumption.

Useful LED Indicator

When the power switch is turned on, the red power light will be on. The blue lights will be on when the hard drive is recognized and they will flash during data reading or writing.

Warm Note for Offline Clone:

Please back up all the data from your source HDD before offline clone.

Please confirm there are no bad sectors from both HDDs, or the clone may fail.

Please make sure that the capacity of the target HDD needs to be equal to or larger than that of the source HDD.

When clone is finished, all 3 blue lights (25%, 50%, 100%) will be on. If all 3 blue lights flash simultaneously, it means the clone failed.

For offline clone, there is no computer needed! Please do not connect the hard drive docking station to your computer until the clone is finished.

About Us:

FIDECO Technology has specialized in computer accessories for more than decades.

We possess the ability to design & develop various HDD/SSD docking stations, SATA/IDE adapters and M.2 SSD enclosures, etc.

We believe you can always get one favorite from our store. What we offer is not only the terrific item, but also the best service ever.

Warm Note:

For new HDD/SSD, please go to “Disk Management” to initialize it first and then your HDD/SSD can be recognized.

For partition, if the capacity of your HDD or SSD is over 2TB, please choose GPT partition.

Please back up all your data before formatting your HDD. For Mac OS, the format needs to be set as exFat.

Package List:

1* Hard Drive Docking Station

1* 12V Power Adapter

1* USB 3.0 Cable

1* User Manual

FAQ

1.Q1. What kind of hard drive does this device support to?

It supports 2.5 3.5 inch SATA HDD and SSD.

2.Q2. Does this device support offline clone?

Yes, it supports offline clone without computer but should note the target hard drive should be larger than source hard drive.

Q3. Does it need to connect computer when offline clone?

No, it only needs to connect power adapter to start offline clone.